Swamp Cooler can increase the value of your home by $2,403
A swamp cooler Riverside is a cooling system that typically uses water evaporation to cool down a home. The idea is that when water changes its form from water to gas through evaporation, it absorbs the heat from the surroundings, leaving the temperature cold. A Riverside swamp cooler has a lot of benefits to offer. First, it is proven to be energy-efficient because it only uses up to 75% electricity as compared to a standard air conditioning unit. Most swamp coolers today operate using 120-volt power which is far less than the regular air conditioner use. Second, swamp coolers are eco-friendly because they do not use refrigerants that emit greenhouse gasses. Third, if a swamp cooler Riverside is damaged, you will find the repair cost is cheaper. The same goes for maintenance and cleaning. Fourth, a swamp cooler can improve the quality of air in a room because of the air filtering feature. Swamp coolers have moist pads that can effectively trap dust, dirt, and other allergens. Lastly, they do not need any ductwork system. Some swamp coolers can even be fitted in windows with very little installation efforts needed.
Fair price breakdown
Two major factors affect the cost of a swamp cooler Riverside installation. That is the cooler size and the location of where it will be installed. The size of your home can add to the cost too. It is only logical to think that if you have a large home, you will need a larger Riverside swamp cooler. The bigger the unit, the more expensive it will be. A 2,000 square foot home that has an 8-foot ceiling typically needs a swamp cooler that can produce around 480000 cubic feet. You will save a lot of money if you purchase a much smaller unit. However, buying a small swamp cooler can be pointless if it does not have the capacity to cool your home. It can be effective if you only want to cool down just a small portion or particular room in your home.
Estimated final cost for swamp cooler
| Item | Quantity | Fair Price |
|---|---|---|
| Air Conditioning Unit Cost | 1 Unit | $2,399.43 |
| Air Conditioning Unit Labor | 6.6 Hours | $391.85 |
| Air Conditioning Unit Job Materials and Supplies | 1 Unit | $27.19 |
| Air Conditioning Unit Equipment Allowance | $35.85 | |
| Totals - Cost to Install Air Conditioning - 1 Unit | $2,854.32 | |
| Average Cost Per Unit | $2,854.31 |
Find the Best Costs on Swamp Cooler - Riverside, 08075
The location of the swamp cooler Riverside can also affect the cost of the project. There are swamp coolers today that can be purchased without any need for installation. You can just plug them, place them anywhere in your home, and they will start working. On the other hand, a swamp cooler that needs duct work has to be installed in attics or basement. This requires professional and meticulous work.
Burlington County Swamp Cooler FAQ
Last Updated: Aug 18, 2024
Local pros & Availability
HVAC Contractors available in your area
- Open
- Closed
